When both jaws of vernier callipers touch each other, zero mark of the vernier scale is right to zero mark of main scale, $4{ }^{\text {th }}$ mark on vernier scale coincides with certain mark on the main scale. While measuring the length of a cylinder, observer observes 15 divisions on main scale and $5^{\text {th }}$ division of vernier scale coincides with a main scale division. Measured length of cylinder is $\_\_\_\_$ mm.

(Least count of Vernier calliper $=0.1 \mathrm{~mm}$ )

In a vernier callipers, 50 vernier scale divisions are equal to 48 main scale divisions. If one main scale division $=0.05 \mathrm{~mm}$, then the least count of the vernier callipers is $\_\_\_\_$ mm.

In a screw gauge, the zero of the circular scale lies 3 divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument thickness of a sheet is measured. If pitch scale reading is 1 mm and the circular scale reading is 51 then the correct thickness of the sheet is $\_\_\_\_$ mm.

[Assume least count is 0.01 mm ]

Four persons measure the length of a rod as $20.00 \mathrm{~cm}, 19.75 \mathrm{~cm}, 17.01 \mathrm{~cm}$ and 18.25 cm . The relative error in the measurement of average length of the rod is :