Student A and student B used two screw gauges of equal pitch and 100 equal circular divisions to measure the radius of a given wire. The actual value of the radius of the wire is 0.322 cm. The absolute value of the difference between the final circular scale readings observed by the students A and B is ______________.

[Figure shows position of reference 'O' when jaws of screw gauge are closed]

Given pitch = 0.1 cm.

An inductor of 10 mH is connected to a 20V battery through a resistor of 10 k$$\Omega$$ and a switch. After a long time, when maximum current is set up in the circuit, the current is switched off. The current in the circuit after 1 $$\mu$$s is $${x \over {100}}$$ mA. Then x is equal to ___________. (Take e^$$-$$1 = 0.37)

A circular conducting coil of radius 1 m is being heated by the change of magnetic field $$\overrightarrow B $$ passing perpendicular to the plane in which the coil is laid. The resistance of the coil is 2 $$\mu$$$$\Omega$$. The magnetic field is slowly switched off such that its magnitude changes in time as

$$B = {4 \over \pi } \times {10^{ - 3}}T\left( {1 - {t \over {100}}} \right)$$

The energy dissipated by the coil before the magnetic field is switched off completely is E = ___________ mJ.

In the reported figure, two bodies A and B of masses 200 g and 800 g are attached with the system of springs. Springs are kept in a stretched position with some extension when the system is released. The horizontal surface is assumed to be frictionless. The angular frequency will be ____________ rad/s when k = 20 N/m.