An aluminium and steel rods having same lengths and cross-sections are joined to make total length of 120 cm at $30^{\circ} \mathrm{C}$. The coefficient of linear expansion of aluminium and steel are $24 \times 10^{-6} /{ }^{\circ} \mathrm{C}$ and $1.2 \times 10^{-5} /{ }^{\circ} \mathrm{C}$, respectively. The length of this composite rod when its temperature is raised to $100^{\circ} \mathrm{C}$, is $\_\_\_\_$ cm.

Water flows through a horizontal tube as shown in the figure. The difference in height between the water columns in vertical tubes is 5 cm and the area of cross-sections at $A$ and $B$ are $6 \mathrm{~cm}^2$ and $3 \mathrm{~cm}^2$ respectively. The rate of flow will be $\_\_\_\_$ $\mathrm{cm}^3 / \mathrm{s}$. (take $g=10 \mathrm{~m} / \mathrm{s}^2$ )

A 3 m long wire of radius 3 mm shows an extension of 0.1 mm when loaded vertically by a mass of 50 kg in an experiment to determine Young's modulus. The value of Young's modulus of the wire as per this experiment is $P \times 10^{11} \, \text{Nm}^{-2}$, where the value of $P$ is: (Take $g = 3\pi \, \text{m/s}^2$)

A capillary tube of radius 0.1 mm is partly dipped in water (surface tension 70 dyn/cm and glass water contact angle ≈ 0°) with 30° inclined with the vertical. The length of water risen in the capillary is _______ cm. (Take $g = 9.8 \text{ m/s}^2$)