A cubical block of density $\rho_b=600 \mathrm{~kg} / \mathrm{m}^3$ floats in a liquid of density $\rho_{\mathrm{e}}=900 \mathrm{kg} / \mathrm{m}^3$. If the height of block is $H=8.0 \mathrm{~cm}$ then height of the submerged part is

$\_\_\_\_$ cm .

A brass wire of length 2 m and radius 1 mm at $27^{\circ} \mathrm{C}$ is held taut between two rigid supports. Initially it was cooled to a temperature of $-43^{\circ} \mathrm{C}$ creating a tension $T$ in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to $1.4 T$, is $\_\_\_\_$ ${ }^{\circ} \mathrm{C}$.

A small metallic sphere of diameter 2 mm and density $10.5 \mathrm{~g} / \mathrm{cm}^3$ is dropped in glycerine having viscosity 10 Poise and density $1.5 \mathrm{~g} / \mathrm{cm}^3$ respectively. The terminal velocity attained by the sphere is $\_\_\_\_$ $\mathrm{cm} / \mathrm{s}$.

$\left(\pi=\frac{22}{7}\right.$ and $\left.g=10 \mathrm{~m} / \mathrm{s}^2\right)$

The strain-stress plot for materials $A, B, C$ and $D$ is shown in the figure. Which material has the largest Young's modulus ?