A moving coil galvanometer has a coil with 175 turns and area 1 cm². It uses a torsion band of torsion constant 10^–6 N-m/rad. The coil is placed in a maganetic field B parallel to its plane. The coil deflects by 1° for a current of 1 mA. The value of B (in Tesla) is approximately :-

A rigid square loop of side 'a' and carrying current I₂ is lying on a horizontal surface near a long current I₁ carrying wire in the same plane as shown in figure. The net force on the loop due to wire will be :

A rectangular coil (Dimension 5 cm × 2.5 cm) with 100 turns, carrying a current of 3 A in the clock-wise direction is kept centered at the origin and in the X-Z plane. A magnetic field of 1 T is applied along X-axis. If the coil is tilted through 45° about Z-axis, then the torque on the coil is :

Two very long, straight, and insulated wires are kept at 90° angle from each other in xy-plane as shown in the figure. These wires carry currents of equal magnitude I, whose directions are shown in the figure. The net magnetic field at point P will be :