1
GATE ECE 2020
MCQ (Single Correct Answer)
+2
-0.67
The band diagram of $p$-type semiconductor with a bandgap of the 1 eV is shown. Using this semiconductor, a MOS capacitor having $V_{T H}$ of $-0.16 \mathrm{~V}, C_{o x}^{\prime}$ of $100 \mathrm{nF} / \mathrm{cm}^2$ and metal work function of 3.87 eV is fabricated. There is no charge within the oxide. If the voltage across the capacitor is $V_{T H}$, the magnitude of depletion charge per unit area (in $\mathrm{C} / \mathrm{cm}^2$ ) is

2
GATE ECE 2017 Set 2
MCQ (Single Correct Answer)
+2
-0.6
Two n-channel MOSFETs, T1 and T2, are identical in all respects except that the width of T2 is double of T1. Both the transistor are biased in the saturation region of operation, but the gate overdrive voltage (VGS - VTH) of T2 is double that of T1, where VGS and VTH are the gate-to-source voltage and threshold voltage of the transistors, respectively. If the drain current and transconductance of T1 are ID1 and gm1 respectively ; the corresponding values of these two parameters for T2 are
3
GATE ECE 2017 Set 2
Numerical
+2
-0
A MOS capacitor is fabricated on p-type Si (silicon) where the metal work function is 4.1 eV
and electron affinity of Si is 4.0 eV, Ec - EF = 0.9 eV; where Ec and EF are conduction band minimum and the Fermi energy levels of Si, respectively. Oxide$${\varepsilon _r} = \,\,3.9,\,\,\,{\varepsilon _{0\,\,}}=\,8.85 \times {10^{ - 14}}$$ F/cm, oxide thickness $${t_{ox}} = 0.1\,\mu m$$
and electronic charge q = $$1.6 \times {10^{ - 19}}$$ C. If the measured flat band
voltage of the capacitor is –1V, then the magnitude of the fixed charge at the oxide semiconductor
interface, in nC/cm2, is __________.
Your input ____
4
GATE ECE 2017 Set 2
MCQ (Single Correct Answer)
+2
-0.6
Assuming that transistor M1 and M2 are identical and have a threshold voltage of 1V, the state of transistors M1 and M2 are respectively
GATE ECE Subjects
Browse all chapters by subject
Control Systems
Engineering Mathematics
Analog Circuits
Network Theory
Electromagnetics
Electronic Devices and VLSI
Digital Circuits
Microprocessors
Signals and Systems
Representation of Continuous Time Signal Fourier Series Fourier Transform Continuous Time Signal Laplace Transform Discrete Time Signal Fourier Series Fourier Transform Discrete Fourier Transform and Fast Fourier Transform Discrete Time Signal Z Transform Continuous Time Linear Invariant System Discrete Time Linear Time Invariant Systems Transmission of Signal Through Continuous Time LTI Systems Sampling Transmission of Signal Through Discrete Time Lti Systems Miscellaneous
Communications
General Aptitude