A tiny metallic rectangular sheet has length and breadth of 5 mm and 2.5 mm , respectively. Using a specially designed screw gauge which has pitch of 0.75 mm and 15 divisions in the circular scale, you are asked to find the area of the sheet. In this measurement, the maximum fractional error will be $\frac{x}{100}$ where $x$ is _______ .

The least count of a screw guage is 0.01 mm . If the pitch is increased by $75 \%$ and number of divisions on the circular scale is reduced by $50 \%$, the new least count will be ________ $\times 10^{-3} \mathrm{~mm}$

In a screw gauge, there are 100 divisions on the circular scale and the main scale moves by $$0.5 \mathrm{~mm}$$ on a complete rotation of the circular scale. The zero of circular scale lies 6 divisions below the line of graduation when two studs are brought in contact with each other. When a wire is placed between the studs, 4 linear scale divisions are clearly visible while $$46^{\text {th }}$$ division the circular scale coincide with the reference line. The diameter of the wire is ______________ $$\times 10^{-2} \mathrm{~mm}$$.

In an experiment to find acceleration due to gravity (g) using simple pendulum, time period of $$0.5 \mathrm{~s}$$ is measured from time of 100 oscillation with a watch of $$1 \mathrm{~s}$$ resolution. If measured value of length is $$10 \mathrm{~cm}$$ known to $$1 \mathrm{~mm}$$ accuracy, The accuracy in the determination of $$\mathrm{g}$$ is found to be $$x \%$$. The value of $$x$$ is ___________.