1
GATE ECE 2014 Set 2
MCQ (Single Correct Answer)
+2
-0.6
For the n-channel MOS transistor shown in the figure, the threshold voltage VTh is 0.8V. Neglect channel length modulation effects. When the drain voltage VD = 1.6 V, the drain current ID was found to be 0.5 mA. GATE ECE 2014 Set 2 Electronic Devices and VLSI - IC Basics and MOSFET Question 20 English
A
0.625
B
0.75
C
1.125
D
1.5
2
GATE ECE 2014 Set 2
Numerical
+2
-0
For the MOSFETs shown in the figure, the threshold voltage |Vt| = 2V and
K=$${1 \over 2}\mu {C_{OX}}\left( {{W \over L}} \right) = 0.1mA/{V^2}$$ . The value of ID (in mA) is _______ GATE ECE 2014 Set 2 Electronic Devices and VLSI - IC Basics and MOSFET Question 19 English
Your input ____
3
GATE ECE 2014 Set 1
Numerical
+2
-0
A depletion type N -channel MOSFET is biased in its linear region for use as a voltage controlled resistor. Assume threshold voltage VTH = -0.5 V, VGS = 2.0 V, VDS = 5 V, W/L=100, COX=10-8 F/cm2 and $${\mu _n}$$ = 800 cm2/V-s. The value of the resistance of the voltage controlled resistor (in $$\Omega $$ ) is _____.
Your input ____
4
GATE ECE 2013
MCQ (Single Correct Answer)
+2
-0.6
The small-signal resistance (i.e., $${{d{V_B}} \over {d{I_D}}}$$ ) in $$k\Omega $$ offered by the n-channel MOSFET M shown in the figure below, at bias point of VB = 2V is (device data for M: device transconductance parameter

kN = $${\mu _n}{C_{ox}^{'}}$$ (W/L)= 40$$\mu {\rm A}/{V^2},$$ threshold voltage VTN=1V, and neglect body effect and channel length modulation effects)

GATE ECE 2013 Electronic Devices and VLSI - IC Basics and MOSFET Question 22 English
A
12.5
B
25
C
50
D
100
GATE ECE Subjects
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12