A conducting circular loop is rotated about its diameter at a constant angular speed of $100 \mathrm{rad} / \mathrm{s}$ in a magnetic field of 0.5 T perpendicular to the axis of rotation. When the loop is rotated by $30^{\circ}$ from the horizontal position, the induced EMF is 15.4 mV . The radius of the loop is $\_\_\_\_$ mm.

$$ \left(\text { Take } \pi=\frac{22}{7}\right) $$

Inductance of a coil with $10^4$ turns is 10 mH and it is connected to a dc source of 10 V with internal resistance of $10 \Omega$. The energy density in the inductor when the current reaches $\left(\frac{1}{e}\right)$ of its maximum value is $\alpha \pi \times \frac{1}{e^2} \mathrm{~J} / \mathrm{m}^3$. The value of $\alpha$ is

$\_\_\_\_$ .

$$ \left(\mu_0=4 \pi \times 10^{-7} \mathrm{Tm} / \mathrm{A}\right) . $$

Conductor wire ABCDE with each arm 10 cm in length is placed in magnetic field of $\frac{1}{\sqrt{2}}$ Tesla, perpendicular to its plane. When conductor is pulled towards right with constant velocity of $10 \mathrm{~cm} / \mathrm{s}$, induced emf between points A and E is ________ mV .

A conducting bar moves on two conducting rails as shown in the figure. A constant magnetic field B exists into the page. The bar starts to move from the vertex at time t = 0 with a constant velocity. If the induced EMF is E ∝ tⁿ, then value of n is _________.