1
GATE ECE 2024
MCQ (Single Correct Answer)
+2
-1.33
A full scale sinusoidal signal is applied to a 10-bit ADC. The fundamental signal component in the ADC output has a normalized power of 1 W, and the total noise and distortion normalized power is 10 $\mu$W. The effective number of bits (rounded off to the nearest integer) of the ADC is _______.
2
GATE ECE 2022
Numerical
+2
-0.67
Consider the circuit shown with an ideal OPAMP. The output voltage V0 is __________ V (rounded off to two decimal places).
Your input ____
3
GATE ECE 2016 Set 2
MCQ (Single Correct Answer)
+2
-0.6
In an N bit flash ADC, the analog voltage is fed simultaneously to 2N− 1 comparators. The
output of the comparators is then encoded to a binary format using digital circuits. Assume that
the analog voltage source Vin(whose output is being converted to digital format) has a source
resistance of 75 Ω
as shown in the circuit diagram below and the input capacitance of each comparator is 8 pF. The input must settle to an accuracy of 1/2 LSB even for a full scale input change for properconversion. Assume that the time taken by the thermometer to binary
encoder is negligible.
If the flash ADC has 8 bit resolution, which one of the following alternatives is closest to the maximum sampling rate?
![GATE ECE 2016 Set 2 Digital Circuits - Analog to Digital and Digital to Analog Converters Question 9 English](https://gateclass.cdn.examgoal.net/examside/questions/0d6bb6db9d4479363e1503f7f2e35e14fdca64c8d7d00e05ec22234b7de91718.jpg)
4
GATE ECE 2008
MCQ (Single Correct Answer)
+2
-0.6
In the following circuit, the comparator output is logic “I” if V1 > V2 and is logic “0” otherwise. The D/A conversion is done as per the relation
$$${V_{DAC}} = \sum\limits_{n = 0}^3 {{2^{n - 1}}{b_n}\,\,} Volts,$$$
where b3(MSB), b2, b1 and b0 (LSB) are the counter outputs.
The counter starts from the clear state.
![GATE ECE 2008 Digital Circuits - Analog to Digital and Digital to Analog Converters Question 4 English](https://gateclass.cdn.examgoal.net/examside/questions/b4e4281d9153f270f25292f592a788fe5de7d737b3791e8df385e9c2bb1a4954.jpg)
The magnitude of the error between VDAC and Vin at steady state in volts is
Questions Asked from Analog to Digital and Digital to Analog Converters (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE ECE Subjects
Signals and Systems
Representation of Continuous Time Signal Fourier Series Discrete Time Signal Fourier Series Fourier Transform Discrete Time Signal Z Transform Continuous Time Linear Invariant System Transmission of Signal Through Continuous Time LTI Systems Discrete Time Linear Time Invariant Systems Sampling Continuous Time Signal Laplace Transform Discrete Fourier Transform and Fast Fourier Transform Transmission of Signal Through Discrete Time Lti Systems Miscellaneous Fourier Transform
Network Theory
Control Systems
Digital Circuits
General Aptitude
Electronic Devices and VLSI
Analog Circuits
Engineering Mathematics
Microprocessors
Communications
Electromagnetics