1
GATE ECE 2007
MCQ (Single Correct Answer)
+2
-0.6
In the digital-to-Analog converter circuit shown in the figure below,
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
The current i is
2
GATE ECE 2007
MCQ (Single Correct Answer)
+2
-0.6
In the digital-to-Analog converter circuit shown in the figure below,
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
The voltage V0 is
3
GATE ECE 2006
MCQ (Single Correct Answer)
+2
-0.6
A 4-bit D/A converter is connected to a free-running 3-bit UP counter, as shown in the following figure. Which of the following waveforms will be observed at V0=?
In the figure shown above, the ground has been shown by the symbol $$\nabla $$
4
GATE ECE 2003
MCQ (Single Correct Answer)
+2
-0.6
The circuit shown in figure is a 4-bit DAC
The input bits 0 and 1 are represented by 0 and 5 V respectively. The OP- AMP is ideal, but all the resistances and the 5V inputs have a tolerance of ±10%.
The specification (rounded to the nearest multiple of 5%) for the tolerance of the DAC is
The specification (rounded to the nearest multiple of 5%) for the tolerance of the DAC is
Questions Asked from Analog to Digital and Digital to Analog Converters (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE ECE Subjects
Network Theory
Control Systems
Electronic Devices and VLSI
Analog Circuits
Digital Circuits
Microprocessors
Signals and Systems
Representation of Continuous Time Signal Fourier Series Discrete Time Signal Fourier Series Fourier Transform Discrete Time Signal Z Transform Continuous Time Linear Invariant System Transmission of Signal Through Continuous Time LTI Systems Discrete Time Linear Time Invariant Systems Sampling Continuous Time Signal Laplace Transform Discrete Fourier Transform and Fast Fourier Transform Transmission of Signal Through Discrete Time Lti Systems Miscellaneous Fourier Transform
Communications
Electromagnetics
General Aptitude