1
GATE ECE 2025
Numerical
+1
-0
A 4-bit weighted-resistor DAC with inputs $b_3, b_2, b_1$, and $b_0$ (MSB to LSB) is designed using an ideal opamp, as shown below. The switches are closed when the corresponding input bits are logic ' 1 ' and open otherwise.
When the input $b_3 b_2 b_1 b_0$ changes from 1110 to 1101, the magnitude of the change in the output voltage $V_O$ (in mV , rounded off to the nearest integer) is ____________.
Your input ____
2
GATE ECE 2023
Numerical
+1
-0
The signal-to-noise ratio (SNR) of an ADC with a full-scale sinusoidal input is given to be 61.96 dB. The resolution of the ADC is __________ bits (rounded off to the nearest integer).
Your input ____
3
GATE ECE 2020
Numerical
+1
-0
A 10 bit D/A converter is calibrated over the full range 0 to 10 V . If the input to the D/A converter is 13 A (in hex), the output (rounded off to three decimal places) is $\_\_\_\_$ V.
Your input ____
4
GATE ECE 2015 Set 1
Numerical
+1
-0
Consider a four bit D to A converter. The analog value corresponding to digital signals of values 0000 and 0001 are 0 V and 0.0625 V respectively. The analog value (in Volts ) corresponding to the digitals signal 1111 is ______________.
Your input ____
GATE ECE Subjects
Browse all chapters by subject
Network Theory
Control Systems
Electronic Devices and VLSI
Analog Circuits
Digital Circuits
Microprocessors
Signals and Systems
Discrete Fourier Transform and Fast Fourier Transform Discrete Time Signal Fourier Series Fourier Transform Continuous Time Signal Laplace Transform Fourier Transform Representation of Continuous Time Signal Fourier Series Transmission of Signal Through Continuous Time LTI Systems Miscellaneous Sampling Continuous Time Linear Invariant System Discrete Time Linear Time Invariant Systems Discrete Time Signal Z Transform Transmission of Signal Through Discrete Time Lti Systems
Communications
Electromagnetics
General Aptitude