1
GATE ECE 2005
MCQ (Single Correct Answer)
+2
-0.6
The h parameters of the circuit shown in Fig. are


2
GATE ECE 2005
MCQ (Single Correct Answer)
+2
-0.6
If R1 = R2 = R4 = R and R3 = 1.1R in the bridge circuit shown in figure, then the reading in the ideal voltmeter connected between a and b is

3
GATE ECE 2004
MCQ (Single Correct Answer)
+2
-0.67
For the lattice circuit shown in Fig., $${Z_a} = j\,2\,\Omega \,\,and\,\,{Z_b} = \,\,2\Omega $$. The values of the open circuit impedance parameters
$$Z\,\left[ {\matrix{ {{Z_{11}}} & {{Z_{12}}} \cr {{Z_{21}}} & {{Z_{22}}} \cr } } \right]\,$$ are
$$Z\,\left[ {\matrix{ {{Z_{11}}} & {{Z_{12}}} \cr {{Z_{21}}} & {{Z_{22}}} \cr } } \right]\,$$ are
4
GATE ECE 2004
MCQ (Single Correct Answer)
+2
-0.6
For the circuit shown in Figure, the initial conditions are zeros. Its transfer function
$$H(s) = {{{V_c}\,(s)} \over {{V_i}\,(s)}}$$ is


GATE ECE Subjects
Browse all chapters by subject
General Aptitude
Network Theory
Microprocessors
Signals and Systems
Discrete Fourier Transform and Fast Fourier Transform Discrete Time Signal Fourier Series Fourier Transform Continuous Time Signal Laplace Transform Fourier Transform Representation of Continuous Time Signal Fourier Series Transmission of Signal Through Continuous Time LTI Systems Miscellaneous Sampling Continuous Time Linear Invariant System Discrete Time Linear Time Invariant Systems Discrete Time Signal Z Transform Transmission of Signal Through Discrete Time Lti Systems
Electromagnetics
Digital Circuits
Electronic Devices and VLSI
Control Systems
Communications
Engineering Mathematics