An 8085 executes the following instructions
2710 LXI H, 30A0H
DAD H
PCHL

All addresses and constants are in Hex. Let PC be the contents of the program counter and HL be the contents of the HL register pair just after executing PCHL.

Which of the following statements is correct.

A two-port network shown below is excited by external dc sources. The voltages and the currents are measured with voltmeters $${V_1}$$, $${V_2}$$ and ammeter $${A_1}$$, $${A_2}$$ (all assumed to be ideal), as indicated. Under following switch conditions, the readings obtained are:

(i) $${S_1} - open,\,\,\,\,{S_2} - closed$$
$${A_1} = 0\,A,\,\,\,\,\,\,{V_1} = \,4.5\,\,V,$$
$${V_2}\, = \,1.5\,V,\,\,\,\,{A_2}\, = \,1\,A$$

(ii) $${S_1} - Closed,\,\,\,\,{S_2} - Open$$
$${A_1} = 4\,A,\,\,\,\,\,\,{V_1} = \,6\,\,V,$$
$${V_2}\, = \,6\,V,\,\,\,\,{A_2}\, = \,0\,A$$

The h-parameter matrix for this network is

A two-port network shown below is excited by external dc sources. The voltages and the currents are measured with voltmeters $${V_1}$$, $${V_2}$$ and ammeter $${A_1}$$, $${A_2}$$ (all assumed to be ideal), as indicated. Under following switch conditions, the readings obtained are:

(i) $${S_1} - open,\,\,\,\,{S_2} - closed$$
$${A_1} = 0\,A,\,\,\,\,\,\,{V_1} = \,4.5\,\,V,$$
$${V_2}\, = \,1.5\,V,\,\,\,\,{A_2}\, = \,1\,A$$

(ii) $${S_1} - Closed,\,\,\,\,{S_2} - Open$$
$${A_1} = 4\,A,\,\,\,\,\,\,{V_1} = \,6\,\,V,$$
$${V_2}\, = \,6\,V,\,\,\,\,{A_2}\, = \,0\,A$$

The z-parameter matrix for this network is

The driving point impedance of the following network is given by $$Z(s) = {{0.2\,s} \over {{s^2}\, + \,0.1\,s\, + \,2}}$$. The component values are