A transmission line with a characteristic impedance of 100 $$\Omega $$ is used to match a 50 $$\Omega $$ section to a 200 $$\Omega $$ section. If the matching is to be done both at 429 MHz and 1 GHz, the tength of the transmission line can be approximately

A transmission line of characteristic impedance 50 $$\Omega $$ is terminated in a load impedance $$Z_L$$. The VSWR of the line is measured as 5 and the first of the voltage naxima in the line is observed at a distance of $$\lambda /4$$ from the load. The value of $$Z_L$$ is

In the circuit shown, all the transmission line sections are lossless. The Voltage Standing Wave Ration (VSWR) on the 60W line is

A transmission line terminates in two branches, each of length $$\lambda /4$$, as shown.The branches are terminated by 50 $$\Omega $$ loads. The lines are lossless and have the characteristic impedances shown. Determine the impedance $${Z_i}$$ as seen by the source.