A positive edge-triggered D flip-flop is connected to a positive edge-triggered JK flip-flop as follows. The Q output of the D flip-flop is connected to both the J and K inputs of the JK flip-flop, while the Q output of the JK flip-flop is connected to the input of the D flip-flop. Initially, the output of the D flip-flop is set to logic one and the output of the JK flip-flop is cleared. Which one of the following is the bit sequence (including the initial state) generated at the Q output of the JK flip-flop when the flip-flops are connected to a free-running common clock? Assume that J = K = 1 is the toggle mode and J = K = 0 is the state-holding mode of the JK flip-flop. Both the flip-flops have non-zero propagation delays.

The above synchronous sequential circuit built using $$JK$$ flip-flops is initialized with $${Q_2}{Q_1}{Q_0} = 000.\,\,$$ The state sequence for this circuit for the next $$3$$ clock cycles is

Consider the following circuit involving three Dtypes flip-flops used in a certain type of Counter configuration.

If all the flip-flops were reset to $$0$$ at power on, what is the total number of distinct outputs (states) represented by $$PQR$$ generated by the counter?

Consider the following circuit involving three Dtypes flip-flops used in a certain type of Counter configuration.

If at some instance prior to the occurrence of the clock edge, $$P, Q$$ and $$R$$ have a value $$0,1$$ and $$0$$ respectively, what shall be the value of $$PQR$$ after the clock edge?