A source produces binary data at the rate of 10 kbps. The binary symbols are represented as shown in fig. The source output is transmitted using two modulation schemes, namely Binary PSK (BPSK) and Quadrature PSK (QPSK). Let $${B_1}$$ and $${B_2}$$ be the bandwidth requirements of BPSK and QPSK respectively. Assuming that the bandwidth of the above rectangular pulses is 10 kHz, $${B_1}$$ and $${B_2}$$ are

Three analog signals, having bandwidths 1200 Hz, 600 Hz and 600 Hz are sampled at their respective Nyquist rates, enocodes with 12 bit words, and time division multiplexed. The bit rate for the multiplexed signal is

The input to a linear delta modulator having a step size $$\Delta $$ = 0.628 is a sine wave with frequency f_m and peak amplitude E_m. If the sampling frequency f_s = 40 KHz. the combination of the sine-wave frequency and the amplitude, where slope overload will take place is

A signal is sampled at 8 KHz and is quantized using 8-bit uniform quantizer. Assuming $$SN{R_q}$$ for a sinusoidal signal, the correct statement for PCM signal with a bit rate of R is