It is desired to multiply the numbers 0AH by 0BH and store the result in the accumulator. The numbers are available in registers B and C respectively. A part of the 8085 program for this purpose is given below:
MVI A, 00H
LOOP:.........
...............
HLT END

The sequence of instruction to be complete the program would be

The number of memory cycles required to execute the following 8085 instructions
(I.) LDA 3000H
(II.) LXI D, FOF 1H
Would be

The 8255 Programmable Peripheral Interface is used as described below.

I. An A/D converter is interfaced to a microprocessor through an 8255. the conversion is initiated by a signal from the 8255 on Port C. A signal on Port C causes data to be strobed into Port A.

II. Two computers exchange data using a pair of 8255s. Port A works as a bidirectional data port supported by appropriate handshaking signals.

The appropriate modes of operation of the 8255 for I and II would be

For the circuit shown in Figure, the initial conditions are zeros. Its transfer function $$H(s) = {{{V_c}\,(s)} \over {{V_i}\,(s)}}$$ is