A source produces binary data at the rate of 10 kbps. The binary symbols are represented as shown in fig. The source output is transmitted using two modulation schemes, namely Binary PSK (BPSK) and Quadrature PSK (QPSK). Let $${B_1}$$ and $${B_2}$$ be the bandwidth requirements of BPSK and QPSK respectively. Assuming that the bandwidth of the above rectangular pulses is 10 kHz, $${B_1}$$ and $${B_2}$$ are

Three analog signals, having bandwidths 1200 Hz, 600 Hz and 600 Hz are sampled at their respective Nyquist rates, enocodes with 12 bit words, and time division multiplexed. The bit rate for the multiplexed signal is

A 1 mW video signal having a bandwidth of 100 MHz is transmitted to a receiver through a cable that has 40 dB loss. If the effective one-sided noise spectral density at the receiver is 10^-20 Watt/Hz, then the signal-to-noise ratio at the receiver is

Two sinusoidal signals of same amplitude and frequencies 10 kHz and 10.1 kHz are added together. The combined signal is given to an ideal frequency detector. The output of the detector is