Water $$\left( {\rho = 1000kg/{m^3}} \right)$$ flows through a venturimeter with inlet diameter $$80$$ $$mm$$ and throat diameter $$40$$ $$mm.$$ The inlet and throat gauge pressures are measured to be $$400$$ $$kPa$$ and $$130$$ $$kPa$$ respectively. Assuming the venturimeter to be horizontal and neglecting friction, the inlet velocity (in $$m/s$$) is ___________.

A siphon is used to drain water from a large tank as shown in the figure below. Assume that the level of water is maintained constant. Ignore frictional effect due to viscosity and losses at entry and exit. At the exit of the siphon, the velocity of water is

An ideal water jet with volume flow rate of $$0.05{m^3}/s$$ strikes a flat plane placed normal to its path and exerts a force of $$1000N.$$ Considering the density of water as $$1000$$ $$kg/{m^3},$$ the diameter (in $$mm$$) of the water jet is ____________

Water is coming out from a tap and falls vertically downwards. At the tap opening, the stream diameter is $$20$$ $$mm$$ with uniform velocity of $$2$$ $$m/s.$$ Acceleration due to gravity is $$9.81$$ $$m/{s^2}.$$ Assuming steady, inviscid flow, constant atmospheric pressure everywhere and neglecting curvature and surface tension effects, the diameter in mm of the stream $$0.5$$ $$m$$ below the tap is approximately