Match the items in columns $$I$$ and $$II$$

Column $$I$$
$$P.$$ Addendum
$$Q.$$ Instantaneous center of velocity
$$R.$$ Section modulus
$$S.$$ Prince circle

Column $$II$$
$$1.$$ Cam
$$2.$$ Beam
$$3.$$ Linkage
$$4.$$ Gear

The overall gear ratio in a 2 stage speed reduction gear box (with all spur gears) is 12. The input and output shafts of the gear box are collinear. The countershafts which is parallel to the input and output shafts has a gear (Z₂ teeth) and pinion (Z₃ = 15 teeth) to mesh with pinion (Z₁ = 16 teeth) on the input shafts and gear (Z₄ teeth) on the output shafts respectively. It was decided to use a gear ratio of 4 with 3 module in the first stage and 4 module in the second stage.

The centre distance in the second stage is

The overall gear ratio in a 2 stage speed reduction gear box (with all spur gears) is 12. The input and output shafts of the gear box are collinear. The countershafts which is parallel to the input and output shafts has a gear (Z₂ teeth) and pinion (Z₃ = 15 teeth) to mesh with pinion (Z₁ = 16 teeth) on the input shafts and gear (Z₄ teeth) on the output shafts respectively. It was decided to use a gear ratio of 4 with 3 module in the first stage and 4 module in the second stage.

Z₂ and Z₄ are

The sun gear in the figure is driven clockwise at 100 rpm. The ring gear is held stationary. For the number of teeth shown on the gears, the arm rotations at