Match List - $${\rm I}$$ (products) with List - $${\rm II}$$ (casting process) and select the correct answer using the codes given below the lists

A mould has a downsprue whose length is $$20$$ $$cm$$ and the cross sectional area at the base of the down sprue is $$1\,\,c{m^2}.$$ The down sprue feeds a horizontal runner leading into the mould cavity of volume $$1000\,\,c{m^3}.$$ The time required to fill the mould cavity will be

Gray cast iron blocks $$200 \times 100 \times 10\,\,mm$$ are to be cast in sand moulds. Shrinkage allowance for pattern making is $$1$$%. The ratio of the volume of pattern to that of the casting will be

With a solidification factor of $$0.97 \times {10^6}s/{m^2},$$ the solidification time (in seconds) for a spherical casting of $$200$$ $$mm$$ diameter is