A cylindrical riser of $$6$$ $$cm$$ diameter and $$6$$ $$cm$$ height has to be designed for a sand casting mould for producing a steel rectangular plate casting of $$7cm \times 10cm \times 2cm$$ dimensions having the total solidification time of $$1.36$$ minute. The total solidification time (in minute) of the riser is ___________________

A cylindrical blind riser with diameter $$d$$ and height $$h,$$ is placed on the top of the mold cavity of a closed type sand mold as shown in the figure. If the riser is of constant volume, then the rate of solidification in the riser is the least when the ratio $$h:d$$ is

A cubic casting of $$50mm$$ side undergoes volumetric solidification shrinkage and volumetric solid contraction of $$4\% $$ and $$6\% $$ respectively. No riser is used. Assume uniform cooling in all directions. The side of cube after solidification and contraction is

For the case of molding, it is decided to replace a spherical riser of diameter $$100$$ $$mm$$ by a cylindrical riser. Determine size of the cylindrical riser that will have the identical solidification time. Assume blind risering & ratio of height to radius of cylinder is $$2.$$