GATE ME 2007 | Deflection of Beams Question 17 | Strength of Materials

GATE ME 2007

MCQ (Single Correct Answer)

-0.6

A uniformly loaded propped cantilever beam and its free body diagram are shown below. The reactions are GATE ME 2007 Strength of Materials - Deflection of Beams Question 3 English

GATE ME 2007 Strength of Materials - Deflection of Beams Question 3 English

$${R_1} = {{5qL} \over 8},{R_2} = {{3qL} \over 8},M = {{q{L^2}} \over 8}$$

$${R_1} = {{3qL} \over 8},{R_2} = {{5qL} \over 8},M = {{q{L^2}} \over 8}$$

$${R_1} = {{5qL} \over 8},{R_2} = {{3qL} \over 8},M = 0$$

$${R_1} = {{3qL} \over 8},{R_2} = {{35qL} \over 8},M = 0$$

GATE ME 2004

MCQ (Single Correct Answer)

-0.6

A steel beam of breadth 120 mm and height 750 mm is loaded as shown in the figure. Assume modulus of elasticity as 200 GPa. GATE ME 2004 Strength of Materials - Deflection of Beams Question 18 English

GATE ME 2004 Strength of Materials - Deflection of Beams Question 18 English

The beam is subjected to a maximum bending moment of

3375 kN-m

4750 kN-m

6750 kN-m

8750 kN-m

GATE ME 2004

MCQ (Single Correct Answer)

-0.6

GATE ME 2004 Strength of Materials - Deflection of Beams Question 17 English

The value of maximum deflection of the beam is

93.75 mm

83.75 mm

73.75 mm

63.75 mm

GATE ME 2003

MCQ (Single Correct Answer)

-0.6

A simply supported laterally loaded beam was found to deflect more than a specified value. Which of the following measures will reduce the deflection?

Increase the area moment of inertia

Increase the span of the beam

Select a different material having lesser modulus of elasticity

Magnitude of the load to be increased