GATE ME 2014 Set 4 | Deflection of Beams Question 9 | Strength of Materials

GATE ME 2014 Set 4

MCQ (Single Correct Answer)

-0.6

A frame is subjected to a load $$P$$ as shown in the figure. The frame has a constant flexural rigidity $$EI$$. The effect of axial load is neglected. The deflection at point $$A$$ due to the applied load $$P$$ is GATE ME 2014 Set 4 Strength of Materials - Deflection of Beams Question 10 English

GATE ME 2014 Set 4 Strength of Materials - Deflection of Beams Question 10 English

$${1 \over 3}\,{{P{L^3}} \over {EI}}$$

$${2 \over 3}\,{{P{L^3}} \over {EI}}$$

$${{P{L^3}} \over {EI}}$$

$${4 \over 3}\,{{P{L^3}} \over {EI}}$$

GATE ME 2014 Set 2

MCQ (Single Correct Answer)

-0.6

The flexural rigidity $$(EI)$$ of a cantilever beam is assumed to be constant over the length of the beam as shown in figure. If a load $$P$$ and bending moment $$PL/2$$ are applied at the free end of the beam then the value of the slope at the free end is GATE ME 2014 Set 2 Strength of Materials - Deflection of Beams Question 13 English

GATE ME 2014 Set 2 Strength of Materials - Deflection of Beams Question 13 English

$${1 \over 2}$$ $${{P{L^2}} \over {EI}}$$

$${{P{L^2}} \over {EI}}$$

$${3 \over 2}$$ $${{P{L^2}} \over {EI}}$$

$${5 \over 2}$$ $${{P{L^2}} \over {EI}}$$

GATE ME 2014 Set 2

MCQ (Single Correct Answer)

-0.6

A cantilever beam of length, $$L,$$ with uniform cross-section and flexural rigidity $$ EI,$$ is loaded uniformly by a vertical load, $$w$$ per unit length. The maximum vertical deflection of the beam is given by

$${{w{L^4}} \over {8EI}}$$

$${{w{L^4}} \over {16EI}}$$

$${{w{L^4}} \over {4EI}}$$

$${{w{L^4}} \over {24EI}}$$

GATE ME 2009

MCQ (Single Correct Answer)

-0.6

A triangular-shaped cantilever beam of uniform- thickness is shown in the figure. The young's modulus of the material of the beam is $$E$$. $$A$$ concentrated load $$P$$ is applied at the free end of the beam. GATE ME 2009 Strength of Materials - Deflection of Beams Question 15 English