1
GATE ME 2006
MCQ (Single Correct Answer)
+2
-0.6
Match the items in column $${\rm I}$$ and $${\rm I}$$ $${\rm I}$$ GATE ME 2006 Production Engineering - Sheet Metal Forming Processes Question 10 English
A
$$P - 6,\,\,Q - 3,\,\,R - 1,\,\,S - 2$$
B
$$P - 4,\,\,Q - 5,\,\,R - 6,\,\,S - 1$$
C
$$P - 2,\,\,Q - 5,\,\,R - 3,\,\,S - 4$$
D
$$P - 4,\,\,Q - 3,\,\,R - 1,\,\,S - 2$$
2
GATE ME 2005
MCQ (Single Correct Answer)
+2
-0.6
A $$2$$ $$mm$$ thick metal sheet is to be bent at an angle of one radian with a bend radius of $$100$$ $$mm.$$ If the stretch factor is $$0.5,$$ the bend allowance is GATE ME 2005 Production Engineering - Sheet Metal Forming Processes Question 11 English
A
$$99$$ $$mm$$
B
$$100$$ $$mm$$
C
$$101$$ $$mm$$
D
$$102$$ $$mm$$
3
GATE ME 2004
MCQ (Single Correct Answer)
+2
-0.6
$$10$$ $$mm$$ diameter holes are to be punched in a steel sheet of $$3$$ $$mm$$ thickness. Shear strength of the material is $$400\,\,N/m{m^2}$$ and penetration is $$40\% $$. Shear provided on the punch is $$2$$ $$mm.$$ The blanking force during the operation will be
A
$$22.6$$ $$kN$$
B
$$37.7$$ $$kN$$
C
$$61.6$$ $$kN$$
D
$$94.3$$ $$kN$$
4
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A shell of $$100$$ $$mm$$ diameter and $$100$$ $$mm$$ height with the corner radius of $$0.4$$ $$mm$$ is to be produced by cup drawing. The required blank diameter is
A
$$118$$ $$mm$$
B
$$161$$ $$mm$$
C
$$224$$ $$mm$$
D
$$312$$ $$mm$$
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12