1
GATE ME 2004
MCQ (Single Correct Answer)
+2
-0.6
$$10$$ $$mm$$ diameter holes are to be punched in a steel sheet of $$3$$ $$mm$$ thickness. Shear strength of the material is $$400\,\,N/m{m^2}$$ and penetration is $$40\% $$. Shear provided on the punch is $$2$$ $$mm.$$ The blanking force during the operation will be
A
$$22.6$$ $$kN$$
B
$$37.7$$ $$kN$$
C
$$61.6$$ $$kN$$
D
$$94.3$$ $$kN$$
2
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A shell of $$100$$ $$mm$$ diameter and $$100$$ $$mm$$ height with the corner radius of $$0.4$$ $$mm$$ is to be produced by cup drawing. The required blank diameter is
A
$$118$$ $$mm$$
B
$$161$$ $$mm$$
C
$$224$$ $$mm$$
D
$$312$$ $$mm$$
3
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A metal disc of $$20$$ $$mm$$ diameter is to be punched from a sheet of $$2$$ $$mm$$ thickness. The punch and the die clearance is $$3\% $$. The required punch diameter is
A
$$19.88$$ $$mm$$
B
$$19.94$$ $$mm$$
C
$$20.06$$ $$mm$$
D
$$20.12$$ $$mm$$
4
GATE ME 1999
MCQ (Single Correct Answer)
+2
-0.6
Identify the stress strain in the flange portion of a partially drawn cylindrical cup when deep drawing without a blank holder
A
Tensile in all three directions
B
No stress in the flange at all, because there is no blank - holder
C
Tensile stress in one direction and compressive in the other direction
D
Tensile in two directions and compressive in third direction
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12