A steel bar of $$10$$ $$mm\,\, \times \,\,50\,\,mm$$ is cantilevered with two $$M12$$ bolts ($$P$$ and $$Q$$) to support a static load of $$4$$ $$kN$$ as shown in figure aside.

The primary and secondary shear loads on rivet $$p,$$ respectively are

A bolted joint in shown below. The maximum shear stress, in $$MPa,$$ in bolts $$A$$ and $$B$$ respectively are

A $$60mm$$ long and $$6mm$$ thick fillet weld carries a steady load of $$15kN$$ along the weld. The shear strength of the weld material is equal to $$200MPa.$$ The factor of safety is