1
GATE ME 2010
MCQ (Single Correct Answer)
+2
-0.6
A bracket shown in fig. is rigidly mounted on wall using four rivets. Each rivet is $$6mm$$ in diameter and has an effective length of $$12mm.$$ GATE ME 2010 Machine Design - Bolted Riveted and Welded Joints Question 13 English

Direct shear stress in $$MPa$$ in the most heavily loaded rivet is

A
$$4.4$$
B
$$8.8$$
C
$$17.6$$
D
$$35.2$$
2
GATE ME 2008
MCQ (Single Correct Answer)
+2
-0.6
A steel bar of $$10$$ $$mm\,\, \times \,\,50\,\,mm$$ is cantilevered with two $$M12$$ bolts ($$P$$ and $$Q$$) to support a static load of $$4$$ $$kN$$ as shown in figure aside. GATE ME 2008 Machine Design - Bolted Riveted and Welded Joints Question 2 English

The primary and secondary shear loads on rivet $$p,$$ respectively are

A
$$2\,\,kN,\,\,20\,\,kN$$
B
$$20$$ $$kN,$$ $$2kN$$
C
$$20$$ $$kN,$$ $$0$$ $$kN$$
D
$$0$$ $$kN$$, $$20$$ $$kN$$
3
GATE ME 2008
MCQ (Single Correct Answer)
+2
-0.6
A steel bar of $$10$$ $$mm\,\, \times \,\,50\,\,mm$$ is cantilevered with two $$M12$$ bolts ($$P$$ and $$Q$$) to support a static load of $$4$$ $$kN$$ as shown in figure aside. GATE ME 2008 Machine Design - Bolted Riveted and Welded Joints Question 1 English

The resultant shear stress on rivet $$P$$ is closest to

A
$$132$$ $$MPa$$
B
$$159$$ $$MPa$$
C
$$178$$ $$MPa$$
D
$$195$$ $$MPa$$
4
GATE ME 2007
MCQ (Single Correct Answer)
+2
-0.6
A bolted joint in shown below. The maximum shear stress, in $$MPa,$$ in bolts $$A$$ and $$B$$ respectively are GATE ME 2007 Machine Design - Bolted Riveted and Welded Joints Question 3 English
A
$$242.6,$$ $$42.5$$
B
$$42.5,242.6$$
C
$$42.5, 42.5$$
D
$$242.6, 242.6$$
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12