A fillet welded joint is subjected to transverse loading F as shown in the figure. Both legs of the fillets are of $$10$$ $$mm$$ size and the weld length is $$30$$ $$mm.$$ If the allowable shear stress of the weld is $$94$$ $$MPa,$$ considering the minimum throat area of the weld, the maximum allowable transverse load in $$kN$$ is

A bracket shown in fig. is rigidly mounted on wall using four rivets. Each rivet is $$6mm$$ in diameter and has an effective length of $$12mm.$$

Direct shear stress in $$MPa$$ in the most heavily loaded rivet is

A steel bar of $$10$$ $$mm\,\, \times \,\,50\,\,mm$$ is cantilevered with two $$M12$$ bolts ($$P$$ and $$Q$$) to support a static load of $$4$$ $$kN$$ as shown in figure aside.

The resultant shear stress on rivet $$P$$ is closest to

A steel bar of $$10$$ $$mm\,\, \times \,\,50\,\,mm$$ is cantilevered with two $$M12$$ bolts ($$P$$ and $$Q$$) to support a static load of $$4$$ $$kN$$ as shown in figure aside.

The primary and secondary shear loads on rivet $$p,$$ respectively are