1
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A part shown in the gig is machined to the sizes given below GATE ME 2003 Production Engineering - Metrology and Inspection Question 22 English

With $$100\% $$ confidence, the resultant dimension $$W$$ will have the specification

A
$$9.99 \pm 0.03\,\,mm$$
B
$$9.99 \pm 0.13\,\,mm$$
C
$$9.99 \pm 0.23\,\,mm$$
D
$$9.99 \pm 0.43\,\,mm$$
2
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
The dimensional limits on a shaft of $$25h7$$ are
A
$$25.000, 25.021$$ $$mm$$
B
$$25.000, 24.979$$ $$mm$$
C
$$25.000, 25.007$$ $$mm$$
D
$$25.000, 24.993$$ $$mm$$
3
GATE ME 1997
Fill in the Blanks
+2
-0
$$3$$ blocks of $${B_1},\,\,{B_2},\,\,{B_3}$$ are to be inserted in a channel of width $$'S'$$ maintaining a minimum gap of width $$T=0.125mm,$$ as shown in fig. For $$P = 18.75 \pm 0.08,\,$$ $$\,Q = 25.00 \pm 0.12,\,$$ $$\,R = 28.125 \pm 0.1$$ and $$S=72.35+X.$$ The tolerance $$' X '$$ is _______________. GATE ME 1997 Production Engineering - Metrology and Inspection Question 24 English
4
GATE ME 1993
MCQ (Single Correct Answer)
+2
-0.6
A shaft of diameter $${20^{\matrix{ { + 0.05} \cr { - 0.15} \cr } }}\,\,mm$$ and a hole of diameter $${20^{\matrix{ { + 0.20} \cr { + 0.10} \cr } }}\,\,mm$$ when assembled would yield.
A
Transition fit
B
Interference fit
C
Clearance fit
D
None of the above
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12