1
GATE ME 1997
Fill in the Blanks
+2
-0
$$3$$ blocks of $${B_1},\,\,{B_2},\,\,{B_3}$$ are to be inserted in a channel of width $$'S'$$ maintaining a minimum gap of width $$T=0.125mm,$$ as shown in fig. For $$P = 18.75 \pm 0.08,\,$$ $$\,Q = 25.00 \pm 0.12,\,$$ $$\,R = 28.125 \pm 0.1$$ and $$S=72.35+X.$$ The tolerance $$' X '$$ is _______________.
2
GATE ME 1993
MCQ (Single Correct Answer)
+2
-0.6
A shaft of diameter $${20^{\matrix{
{ + 0.05} \cr
{ - 0.15} \cr
} }}\,\,mm$$ and a hole of diameter $${20^{\matrix{
{ + 0.20} \cr
{ + 0.10} \cr
} }}\,\,mm$$ when assembled would yield.
3
GATE ME 1992
MCQ (More than One Correct Answer)
+2
-0
Two shafts $$A$$ and $$B$$ have their diameters specified as $$100 \pm 0.1\,\,mm$$ and $$0.1 \pm 0.0001\,\,mm$$ respectively. Which of the following statements is/are true
4
GATE ME 1991
MCQ (Single Correct Answer)
+2
-0.6
A bush was turned after mounting the same on a mandrel. The mandrel diameter in millimeters is $${40^{\matrix{
{ + 0.00} \cr
{ - 0.05} \cr
} }}$$ and bore diameter of bush is $${40^{\matrix{
{ + 0.06} \cr
{ - 0.00} \cr
} }}$$.
The maximum eccentricity of the bush, in $$mm$$ will be
Questions Asked from Metrology and Inspection (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE ME 2023 (2)
GATE ME 2022 Set 2 (1)
GATE ME 2017 Set 2 (1)
GATE ME 2017 Set 1 (1)
GATE ME 2016 Set 2 (1)
GATE ME 2016 Set 3 (1)
GATE ME 2015 Set 1 (1)
GATE ME 2014 Set 4 (1)
GATE ME 2014 Set 3 (1)
GATE ME 2014 Set 1 (1)
GATE ME 2013 (1)
GATE ME 2010 (2)
GATE ME 2009 (1)
GATE ME 2008 (1)
GATE ME 2007 (1)
GATE ME 2004 (1)
GATE ME 2003 (3)
GATE ME 1997 (1)
GATE ME 1993 (1)
GATE ME 1992 (1)
GATE ME 1991 (1)
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude