1
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
The circular disc shown in its plan view in the figure rotates in a plane parallel to the horizontal plane about the point $$O$$ at a uniform angular velocity $$\omega $$. Two other points $$A$$ and $$B$$ are located on the line $$OZ$$ at distances $${r_A}$$ and $${r_B}$$ from $$O$$ respectively. GATE ME 2003 Theory of Machines - Analysis of Plane Mechanisms Question 25 English

The acceleration of point $$B$$ with respect to point $$A$$ is a vector of magnitude

A
$$0$$
B
$$\omega \left( {{r_B}^2 - {r_A}^2} \right)$$ and direction same as the direction of motion of point $$B$$
C
$${\omega ^2}\left( {{r_B} - {r_A}} \right)$$ and direction opposite to the direction of motion of point $$B$$
D
$${\omega ^2}\left( {{r_B} - {r_A}} \right)$$ and direction being from $$Z$$ to $$O$$
2
GATE ME 1999
MCQ (Single Correct Answer)
+2
-0.6
For the audio Cassette mechanism shown in Figure given below where is the instantaneous center of rotation (point) of the two spools? GATE ME 1999 Theory of Machines - Analysis of Plane Mechanisms Question 27 English
A
Point $$P$$ lies to the left of both the spools but a infinity along the line joining $$A$$ and $$H$$
B
Point P lies in between the two spools on the line joining A and H, such that $$\overline {PH} \,\, = \,\,2\overline {AP} $$
C
Point $$P$$ lies to the right of both the spools on the line joining $$A$$ and $$H$$, such that AH = HP
D
Point $$P$$ lies at the intersection of the line joining $$B$$ and $$C$$ and the line joining $$G$$ and $$F$$
3
GATE ME 1996
MCQ (Single Correct Answer)
+2
-0.6
A rod of length $$1$$ $$m$$ is sliding in a corner as shown in Fig.$$2.7.$$ At an instant when the rod makes an angle of $$60$$ degrees with the horizontal plane, the velocity of point $$A$$ on the rod is $$1$$ $$m/s$$. The angular velocity of the rod at this instant is GATE ME 1996 Theory of Machines - Analysis of Plane Mechanisms Question 28 English
A
$$2$$ rad/s
B
$$1.5$$ rad/s
C
$$0.5$$ rad/s
D
$$0.75$$ rad/s
4
GATE ME 1995
MCQ (Single Correct Answer)
+2
-0.6
Fig. shows a quick return mechanism. The crank $$OA$$ rotates clockwise uniformly. $$OA=2$$ cm, $$O{O^1} = 4$$ cm. The ratio of time for forward motion to that for return motion is GATE ME 1995 Theory of Machines - Analysis of Plane Mechanisms Question 29 English
A
$$0.5$$
B
$$2.0$$
C
$$\sqrt 2 $$
D
$$1$$
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
CBSE
Class 12