1
GATE ME 2014 Set 1
Numerical
+2
-0
For a fully developed flow of water in a pipe having diameter $$10$$ $$cm,$$ velocity $$0.1$$ $$m/s$$ and kinematic viscosity $${10^{ - 5}}\,\,{m^2}/s,$$ the value of Darcy friction factor is ________________
Your input ____
2
GATE ME 2006
MCQ (Single Correct Answer)
+2
-0.6
The velocity profile in fully developed laminar flow in a pipe of diameter $$D$$ is given by $$u = {u_0}\left( {1 - 4{r^2}/{D^2}} \right),$$ where $$r$$ is the radial distance from the center. If the viscosity of the fluid is $$\mu ,$$ the pressure drop across a length $$L$$ of the pipe is
A
$${{\mu {u_0}L} \over {{D^2}}}$$
B
$${{4\mu {u_0}L} \over {{D^2}}}$$
C
$${{8\mu {u_0}L} \over {{D^2}}}$$
D
$${{16\mu {u_0}L} \over {{D^2}}}$$
3
GATE ME 1996
MCQ (Single Correct Answer)
+2
-0.6
For laminar flow through a long pipe, the pressure drop per unit length increases.
A
in linear proportion to the cross-sectional area
B
in proportion to the diameter of the pipe
C
in inverse proportion to the cross-sectional area
D
in inverse proportion to the square of cross-sectional area
4
GATE ME 1988
MCQ (Single Correct Answer)
+2
-0.6
The discharge in $${m^3}/s$$ for laminar flow through a pipe of diameter $$0.04$$ $$m$$ having a centre line velocity of $$1.5$$ $$m/s$$ is:
A
$$3\pi /50$$
B
$$3\pi /2500$$
C
$$3\pi /5000$$
D
$$3\pi /10000$$
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12