Better surface finish is obtained with a large rake angle because

A straight turning operation is carried out using a single point cutting tool on an $$AISI$$ $$1020$$ steel rod. The feed is $$0.2$$ $$mm/rev$$ and the depth of cut is $$0.5$$ $$mm.$$ The tool has a side cutting edge angle of $${60^ \circ }.$$ The uncut chip thickness (in $$mm$$) is _______________

Cutting tool is much harder than the work piece. Yet the tool wears out during the tool-work interaction, because

If the Taylor's tool life exponent $$n$$ is $$0.2,$$ and the tool changing time is $$1.5$$ $$min,$$ then the tool life (in min) for maximum production rate is ____________