1
GATE ME 2017 Set 1
Numerical
+2
-0
A rectangular region in a solid is in a state of plane strain. The $$(x,y)$$ coordinates of the corners of the undeformed rectangle are given by $$P(0,0), Q(4,0), R(4,3), S(0,3).$$ The rectangle is subjected to uniform strains, $${\varepsilon _{xx}} = 0.001,\,\,{\varepsilon _{yy}} = 0.002,\,\,{\gamma _{xy}} = 0.003.$$ The deformed length of the elongated diagonal, upto three decimal places, is ______________ units.
Your input ____
2
GATE ME 2015 Set 2
MCQ (Single Correct Answer)
+2
-0.6
In a plane stress condition, the components of stress at a point are $${\sigma _x} = 20$$ MPa, $${\sigma _y} = 80$$ MPa and $${\tau _{xy}} = 40$$ MPa, The maximum shear stress (in MPa) at the point is
3
GATE ME 2012
MCQ (Single Correct Answer)
+2
-0.6
The state of stress at a point under plane stress condition is
$${\sigma _{xx}} = 40\,$$ MPa, $${\sigma _{yy}} = 100\,$$ MPa & $${\tau _{xy}} = 40$$ MPa.
The radius of the Mohr's circle representing the given state of stress in MPa is
$${\sigma _{xx}} = 40\,$$ MPa, $${\sigma _{yy}} = 100\,$$ MPa & $${\tau _{xy}} = 40$$ MPa.
The radius of the Mohr's circle representing the given state of stress in MPa is
4
GATE ME 2008
MCQ (Single Correct Answer)
+2
-0.6
A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It further subjected to a torque of 10 KN-m. The maximum principal stress experienced on the shaft is closest to
Questions Asked from Complex Stresses (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude