1
GATE EE 2006
MCQ (Single Correct Answer)
+2
-0.6
A generator is connected through a $$20$$ MVA, $$13.8/138$$ kV step up transformer, to a transmission line. At the receiving end of the line a load is supplied through a step down transformer of $$10$$ MVA, $$138/69$$ kV rating. A $$0.72$$ p.u. load, evaluated, on load side transformer ratings as base values of $$10$$ MVA and $$69$$ kV in load circuit, the value of the load (in per unit) in generator circuit will be
2
GATE EE 2004
MCQ (Single Correct Answer)
+2
-0.6
A new generator having $${E_g} = 1.4\,\angle {30^ \circ }\,$$ pu [ equivalent to ($$1.212 +j$$ $$0.70$$)pu ] and synchronous reactance $$'{X_s}'$$ of $$1.0$$ pu on the system base, is to be connected to a bus having voltage $${V_t}$$ in the existing power system. This existing power system can be represented by Thevenin's voltage $${E_{th}} = 0.9\angle {0^ \circ }\,\,$$ pu in series with Tjhevenin's impedance $${Z_{th}} = 0.25\angle {90^ \circ }\,\,$$ pu. The magnitude of the voltage $${V_t},$$ of the system in pu will be
3
GATE EE 2001
MCQ (Single Correct Answer)
+2
-0.6
A $$75$$ MVA, $$10$$ kV synchronous generator has Xd $$= 0.4$$ p.u. The Xd value (in p.u.) is a base of $$100$$ MVA, $$11$$ kV is
Questions Asked from Per Unit System (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE EE Subjects
Electric Circuits
Electromagnetic Fields
Signals and Systems
Electrical Machines
Engineering Mathematics
General Aptitude
Power System Analysis
Electrical and Electronics Measurement
Analog Electronics
Control Systems
Power Electronics