GATE ME 2003 | Simple Stress and Strain Question 29 | Strength of Materials

GATE ME 2003

MCQ (Single Correct Answer)

-0.6

A $$200 \times 100 \times 50$$ mm steel block is subjected to a hydrostatic pressure of $$15$$ MPa. The Young's modulus and Poisson's ratio of the material are 200 GPa and $$0.3$$ respectively. The change in the volume of the block in mm³ is

$$85$$

$$90$$

$$100$$

$$110$$

GATE ME 1994

MCQ (Single Correct Answer)

-0.6

Below Fig. shows a rigid bar hinged at A and supported in a horizontal position by two vertical identical steel wires. Neglect the weight of the beam. The tension $${T_1}$$ and $${T_2}$$ induced in these wires by a vertical load P applied as shown are GATE ME 1994 Strength of Materials - Simple Stress and Strain Question 15 English

GATE ME 1994 Strength of Materials - Simple Stress and Strain Question 15 English

$${T_1} = {T_2} = {P \over 2}$$

$${T_1} = {{Pal} \over {\left( {{a^2} + {b^2}} \right)}},{T_2} = {{Pbl} \over {\left( {{a^2} + {b^2}} \right)}}$$

$${T_1} = {{Pbl} \over {\left( {{a^2} + {b^2}} \right)}},{T_2} = {{Pal} \over {\left( {{a^2} + {b^2}} \right)}}$$

$${T_1} = {{Pal} \over {2\left( {{a^2} + {b^2}} \right)}},{T_2} = {{Pbl} \over {2\left( {{a^2} + {b^2}} \right)}}$$

GATE ME 1993

Fill in the Blanks

-0

Determine the temperature rise necessary to induce buckling in a 1 m long circular rod of diameter 40 mm shown in the figure below. Assume the rod to be pinned at its ends and the coefficient of thermal expansion as 20 $$ \times $$ 10^-6/^oC. Assume uniform heating of the bar. GATE ME 1993 Strength of Materials - Simple Stress and Strain Question 1 English