1
GATE ME 2022 Set 2
MCQ (Single Correct Answer)
+1
-0.33
Which one of the following CANNOT impart linear motion in a CNC machine?
A
Linear motor
B
Ball screw
C
Lead screw
D
Chain and sprocket
2
GATE ME 2022 Set 1
MCQ (Single Correct Answer)
+1
-0.33
A square threaded screw is used to lift a load W by applying a force F. Efficiency of square threaded screw is expressed as
A
The ratio of work done by W per revolution to work done by F per revolution
B
W/F
C
F/W
D
The ratio of work done by F per revolution to work done by W per revolution
3
GATE ME 2017 Set 2
Numerical
+1
-0
A single – plate clutch has a friction disc with inner and outer radii of $$20mm$$ and $$40$$ $$mm,$$ respectively. The friction lining in the disc is made in such a way that the coefficient of friction $$\mu $$ varies radially as $$ = 0.01\,r,$$ where $$r$$ is in $$mm.$$ The clutch needs to transmit a friction torque of $$18.85$$ $$kN.mm.$$ As per uniform pressure theory, the pressure (in $$MPa$$) on the disc is ___________________.
Your input ____
4
GATE ME 2016 Set 2
Numerical
+1
-0
The force $${F_1}$$ and $${F_2}$$ in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is $$0.25.$$ The angle of wrap is $$3\pi /2$$ radians. It is given that $$R=1$$ $$m$$ and $${F_2} = 1N.$$ The torque (in $$N-m$$) exerted on the drum is ____________ GATE ME 2016 Set 2 Machine Design - Design of Brakes and Clutches Question 21 English
Your input ____
GATE ME Subjects
Turbo Machinery
EXAM MAP