1
GATE ME 2025
Numerical
+2
-0
A pair of spur gears is required to maintain a velocity ratio of $1: 2$. The module of the gears is 10 mm and the addendum is 10 mm . If the operating pressure angle is $15^{\circ}$, the minimum number of teeth required on the pinion to ensure NO interference/undercutting is _________ (answer in integer).
Your input ____
2
GATE ME 2014 Set 2
Numerical
+2
-0
A spur pinion of pitch diameter $$50$$ $$mm$$ rotates at $$200$$ $$rad/s$$ and transmits $$3$$ $$kW$$ power. The pressure angle of the tooth of the pinion is $${20^ \circ }$$. Assuming that only one pair of the teeth is in contact , the total force (in Newton ) exerted by a tooth of the pinion on the tooth on a mating gear is _________
Your input ____
3
GATE ME 2014 Set 1
Numerical
+2
-0
A pair of spur gears with module $$5$$ $$mm$$ and a center distance of $$450mm$$ is used for a speed reduction of $$5:1$$. The number of teeth on pinion is _________
Your input ____
4
GATE ME 2009
MCQ (Single Correct Answer)
+2
-0.6
A $${20^ \circ }$$ full depth involute spur pinion of $$4mm$$ module and $$21$$ teeth is to transmit $$15kW$$ at $$960rpm.$$ Its face width is $$25mm.$$
Given that the tooth geometry factor is $$0.32$$ and the combined effect of dynamic load and allied factors intensifying the stress is $$1.5;$$ the minimum allowable stress (in $$MPa$$) for the gear material is
Questions Asked from Design of Spur Gears (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude