1
GATE ME 2008
MCQ (Single Correct Answer)
+2
-0.6
One tooth of gear having $$4$$ module and $$32$$ teeth is shown in the figure. Assume that the gear tooth and the corresponding tooth space make equal intercepts on the pitch circumference. GATE ME 2008 Machine Design - Design of Spur Gears Question 1 English

The dimensions $$' a '$$ and $$' b '$$ respectively, are closest to

A
$$6.08$$ $$mm,$$ $$4$$ $$mm$$
B
$$6.48$$ $$mm,$$ $$4.2$$ $$mm$$
C
$$6.28$$ $$mm,$$ $$4.3$$ $$mm$$
D
$$6.28$$ $$mm,$$ $$4.1$$ $$mm$$
2
GATE ME 2007
MCQ (Single Correct Answer)
+2
-0.6
A gear set has a pinion with $$20$$ teeth and a gear with $$40$$ teeth. The pinion runs at $$30rev/s$$ and transmits a power of $$20KW$$. The teeth are on the $${20^ \circ }$$ full-depth system and have a module of $$5mm.$$ The length of the line of action is $$19mm.$$

The center distance for the above gear set in $$mm$$ is

A
$$140$$
B
$$150$$
C
$$160$$
D
$$170$$
3
GATE ME 2007
MCQ (Single Correct Answer)
+2
-0.6
A gear set has a pinion with $$20$$ teeth and a gear with $$40$$ teeth. The pinion runs at $$30rev/s$$ and transmits a power of $$20KW$$. The teeth are on the $${20^ \circ }$$ full-depth system and have a module of $$5mm.$$ The length of the line of action is $$19mm.$$

The resultant force on the contacting gear tooth is $$N$$ is

A
$$77.23$$
B
$$212.20$$
C
$$2258.1$$
D
$$289.43$$
4
GATE ME 2007
MCQ (Single Correct Answer)
+2
-0.6
A gear set has a pinion with $$20$$ teeth and a gear with $$40$$ teeth. The pinion runs at $$30rev/s$$ and transmits a power of $$20KW$$. The teeth are on the $${20^ \circ }$$ full-depth system and have a module of $$5mm.$$ The length of the line of action is $$19mm.$$

The contact ratio of the contacting tooth is

A
$$1.21$$
B
$$1.25$$
C
$$1.29$$
D
$$1.33$$
GATE ME Subjects
Turbo Machinery
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12