1
GATE ME 1992
Subjective
+5
-0
A Venturimeter (throat diameter $$=10.5$$ $$cm$$) is fitted to a water pipe line (internal diameter $$=21.0$$ $$cm$$) in order to monitor flow rate. To improve accuracy of measurement, pressure difference across the venturimeter is measured with the help of an inclined tube manometer, the angle of inclination being $${30^0}$$ (see figure below). For manometer reading of $$9.5$$ $$cm$$ of mercury, find the flow rate.Discharge coefficient of venture is $$0.984.$$
2
GATE ME 1990
Subjective
+5
-0
A jet of water with a velocity $${V_1}$$ (Figure shown below) and area of cross-section $${A_1}$$ enters a stream of slow moving water in a pipe of area $${A_2}$$ and velocity $${V_2}$$. The two streams enter with the same pressure $${P_1}$$. After thoroughly mixing in the pipe the stream emerges as a single stream with velocity $${V_3}$$ and pressure $${p_2}$$. If there are no losses in the flow, determine $$\left( {{p_2} - {p_1}} \right)$$ for
$${V_1} = 20\,\,m/s,\,\,$$
$${V_2} = 10\,\,m/s,\,\,$$
$${A_1} = 0.01\,\,{m^2},\,$$
$$\,{A_2} = 0.02\,{m^2},$$
density of water $$\rho = 1000kg/{m^3}.$$
$${V_1} = 20\,\,m/s,\,\,$$
$${V_2} = 10\,\,m/s,\,\,$$
$${A_1} = 0.01\,\,{m^2},\,$$
$$\,{A_2} = 0.02\,{m^2},$$
density of water $$\rho = 1000kg/{m^3}.$$
3
GATE ME 1989
Subjective
+5
-0
In a syringe as shown in the figure, a piston of $$1\,\,c{m^2}$$ cross section is pushed at a constant speed of $$10\,\,cm/s$$ to eject water through an outlet of $$1\,\,m{m^2}.$$ Determine the force required to move the piston. Neglecting losses.
4
GATE ME 1987
Subjective
+5
-0
Consider the saline drip bottle shown. If $$\rho $$ is the density of saline, find
(a) Pressure at $$A,$$
(b) The velocity of flow of saline through the tube. (Neglect viscous losses in tube). Atmospheric pressure $${P_{atm}}.$$
(a) Pressure at $$A,$$
(b) The velocity of flow of saline through the tube. (Neglect viscous losses in tube). Atmospheric pressure $${P_{atm}}.$$
Questions Asked from Fluid Dynamics (Marks 5)
Number in Brackets after Paper Indicates No. of Questions
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude