1
GATE EE 2018
MCQ (Single Correct Answer)
+1
-0.33
Two wattmeter method is used for measurement of power in a balanced three-phase load supplied from a balanced three-phase system. If one of the wattmeters reads half of the other (both positive), then the power factor of the load is
A
0.532
B
0.632
C
0.707
D
0.866
2
GATE EE 2015 Set 2
MCQ (Single Correct Answer)
+1
-0.3
A 3-phase balanced load which has a power factor of 0.707 is connected to a balanced supply. The power consumed by the load is 5 kW. The power is measured by the two-wattmeter method. The readings of the two wattmeters are
A
3.94 kW and 1.06 kW
B
2.50 kW and 2.50 kW
C
5.00 kW and 0.00 kW
D
2.96 kW and 2.04 kW
3
GATE EE 2014 Set 3
Numerical
+1
-0
An $$LPF$$ wattmeter of power factor $$0.2$$ is having three voltage settings $$300V,$$ $$150V$$ and $$75V,$$ and two current settings $$5 A$$ and $$10A.$$ The full scale reading is $$150.$$ If the wattmeter is used with $$150V$$ voltage setting and $$10A$$ current setting, the multiplying factor of the wattmeter is __________.
Your input ____
4
GATE EE 2014 Set 2
Numerical
+1
-0
While measuring power of a three-phase balanced load by the two-wattmeter method, the readings are $$100$$ $$W$$ and $$250$$ $$W$$. The power factor of the load is ___________.
Your input ____
GATE EE Subjects
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
CBSE
Class 12