1
GATE EE 2018
MCQ (Single Correct Answer)
+2
-0.67
A 0-1 Ampere moving iron ammeter has an internal resistance of 50 m$$\Omega $$ and inductance of
0.1 mH. A shunt coil is connected to extend its range to 0-10 Ampere for all operating
frequencies. The time constant in milliseconds and resistance in m$$\Omega $$ of the shunt coil
respectively are
2
GATE EE 2016 Set 1
Numerical
+2
-0
A dc voltage with ripple is given by $$v\left( t \right)\,\,\,\, = \,\,\,\,\left[ {100 + 10\sin \left( {\omega t} \right) - 5\sin \left( {3\omega t} \right)} \right]$$ volts. Measurements of this voltage $$v\left( t \right),$$ made by moving-coil and moving iron voltmeters, show readings of $${V_1}$$ and $${V_2}$$ respectively. The value of $${V_2} - {V_1},$$ in volts, is _______.
Your input ____
3
GATE EE 2014 Set 2
Numerical
+2
-0
Two ammeters $$X$$ and $$Y$$ have resistances of $$1.2$$ $$\Omega $$ and $$1.5$$ $$\Omega $$ respectively and they give full-scale deflection with $$150$$ $$mA$$ and $$250$$ $$mA$$ respectively. The ranges have been extended by connecting shunts so as to give full scale deflection with $$15$$ $$A.$$ The ammeters along with shunts are connected in parallel and then placed in a circuit in which the total current flowing is $$15A.$$ The current in amperes indicated in ammeter $$X$$ is __________.
Your input ____
4
GATE EE 2014 Set 3
MCQ (Single Correct Answer)
+2
-0.6
A periodic waveform observed across a load is represented by
$$$V\left( t \right) = \left\{ {\matrix{
{1 + \sin \,\omega t} & {0 \le \omega t < 6\pi } \cr
{ - 1 + \sin \,\omega t} & {6\pi \le \omega t < 12\pi } \cr
} } \right.$$$
$$6\pi \le \omega t < 12\,\pi $$
The measured value, using moving iron voltmeter connected across the load, is
$$6\pi \le \omega t < 12\,\pi $$
The measured value, using moving iron voltmeter connected across the load, is
Questions Asked from Basic of Indicating Instruments (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE EE Subjects
Electric Circuits
Electromagnetic Fields
Signals and Systems
Electrical Machines
Engineering Mathematics
General Aptitude
Power System Analysis
Electrical and Electronics Measurement
Analog Electronics
Control Systems
Power Electronics