Suppose that resistors $${R_1}$$ ܴand $${R_2}$$ ܴare connected in parallel to give an equivalent resistor $$R.$$ If resistors ܴ$${R_1}$$ and $${R_2}$$ ܴ have tolerance of $$1$$% each, the equivalent resistor ܴ$$R$$ for resistors ܴ$${R_1}$$$$=300$$ $$\Omega $$ and ܴ$${R_2} = 200\Omega $$ will have tolerance of

A variable $$'w'$$ is related to three other variables $$x, y, z$$ as $$w=xy/z.$$ The variables are measured with meters of accuracy$$ \pm $$ $$0.5$$% reading, $$ \pm 1\% $$ of full scale value and $$ \pm 1.5\% $$ reading the actual readings of the three meters are $$80,20$$ and $$50$$ with $$100$$ being the full scale value for all three. The maximum uncertainty in the measurement of $$'w'$$ will be

The set-up in the figure is used to measure resistance $$R$$. The ammeter and voltmeter resistances are $$0.01$$$$\Omega $$ and $$2000$$$$\Omega $$, respectively. Their readings are $$2A$$ and $$180$$ $$V$$, respectively, giving a measured resistance of $$90$$ $$\Omega $$. The percentage error in the measurement is

Resistances $${R_1}$$ and $${R_2}$$ have, respectively, nominal values of $$10\Omega $$ and $$5\Omega ,$$ and tolerances of $$ \pm 5\% $$ and $$ \pm 10\% $$. The range of values for the parallel combination of $${R_1}$$ and $${R_2}$$ is