Figure shows the extended view of a $$2$$ pole $$dc$$ machine with $$10$$ armature conductors. Normal brush positions are shown by $$A$$ and $$B,$$ placed at the inter polar axis. If the brushes are now shifted, in the direction of rotation to $$A'$$ and $$B'$$ as shown, the voltage waveform $${V_{A'B'}}$$ will resemble

A $$240V$$ $$dc$$ shunt motor draws $$15A$$ while supplying the rated load at a speed of $$80$$ $$rad/s$$. The armature resistance is $$0.5$$ $$ohm$$ and the field winding resistance is $$80$$ $$ohm.$$

The net voltage across the armature resistance at the time of plugging will be

A $$240V$$ $$dc$$ shunt motor draws $$15A$$ while supplying the rated load at a speed of $$80$$ $$rad/s$$. The armature resistance is $$0.5$$ $$ohm$$ and the field winding resistance is $$80$$ $$ohm.$$

The external resistance to be added in the armature circuit to limit the armature current to $$125\% $$ of its rated value is

A $$220V$$ $$DC$$ machine supplies $$20$$ $$A$$ at $$200V$$ as a generator. The armature resistance is $$0.2$$ ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by $$10\% ,$$ the ratio of motor speed to generator speed is