A 100 Hz square wave, switching between 0 V and 5 V, is applied to a CR high-pass filter circuit as shown. The output voltage waveform across the resistor is 6.2 V peak-to-peak. If the resistance R is 820 Ω, then the value C is ______ μF.

(Round off to 2 decimal places)

A resistor and a capacitor are connected in series to a 10 V dc supply through a switch. The switch is closed at t = 0, and the capacitor voltage is found to cross 0 V at t = 0.4τ, where τ is the circuit time constant. The absolute value of percentage change required in the initial capacitor voltage if the zero crossing has to happen at t = 0.2τ is _______  (rounded off to 2 decimal places).

In the circuit shown, switch S₂ has been closed for a long time. A time t = 0 switch S₁ is closed. At t=0⁺ , the rate of change of current through the inductor, in amperes per second, is _______.

In the Fig. shown, all elements used are ideal. For time t<0, S₁ remained closed and S₂ open. At t=0, S₁ is opened and S₂ is closed.If the voltage V_C2 across the capacitor C₂ at t = 0 is zero, the voltage across the capacitor combiation at t = 0⁺ will be