1
GATE CSE 2014 Set 2
MCQ (Single Correct Answer)
+2
-0.6
Consider the store and forward packet switched network given below. Assume that the bandwidth of each link is 106 bytes/sec. A user on host A sends a file of size 103 bytes to host B through routers R1 and R2 in three different ways. In the first case a single packet containing the complete file is transmitted from A to B. In the second case, the file is split into 10 equal parts, and these packets are transmitted from A to B. In the third case, the file is split into 20 equal parts and these packets are sent from A to B. Each packet contains 100 bytes of header information along with the user data. Consider only transmission time and ignore processing, queuing and propagation delays. Also assume that there are no errors during transmission. Let T1, T2 and T3 be the times taken to transmit the file in the first, second and third case respectively. Which one of the following is CORRECT?
2
GATE CSE 2014 Set 1
Numerical
+2
-0
Consider a selective repeat sliding window protocol that uses a frame size of 1 KB to send data on a 1.5 Mbps link with a one-way latency of 50 msec. To achieve a link utilization of 60%, the minimum number of bits required to represent the sequence number field is ________.
Your input ____
3
GATE CSE 2009
MCQ (Single Correct Answer)
+2
-0.6
Frames of 1000 bits are sent over a 106 bps duplex link between two hosts. The propagation time is 25 ms. Frames are to be transmitted into this link to maximally pack them in transit (within the link).
What is the minimum number of bits (I) that will be required to represent the sequence numbers distinctly? Assume that no time gap needs to be given between transmission of two frames.
What is the minimum number of bits (I) that will be required to represent the sequence numbers distinctly? Assume that no time gap needs to be given between transmission of two frames.
4
GATE CSE 2009
MCQ (Single Correct Answer)
+2
-0.6
Frames of 1000 bits are sent over a 106 bps duplex link between two hosts. The propagation time is 25 ms. Frames are to be transmitted into this link to maximally pack them in transit (within the link).
Suppose that the sliding window protocol is used with the sender window size of 2l, where l is the number of bits identified in the earlier part and acknowledgements are always piggy backed. After sending 2l frames, what is the minimum time the sender will have to wait before starting transmission of the next frame? (Identify the closest choice ignoring the frame processing time.)
Suppose that the sliding window protocol is used with the sender window size of 2l, where l is the number of bits identified in the earlier part and acknowledgements are always piggy backed. After sending 2l frames, what is the minimum time the sender will have to wait before starting transmission of the next frame? (Identify the closest choice ignoring the frame processing time.)
Questions Asked from Data Link Layer and Switching (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE CSE 2024 Set 2 (1)
GATE CSE 2021 Set 2 (1)
GATE CSE 2021 Set 1 (1)
GATE CSE 2016 Set 1 (1)
GATE CSE 2016 Set 2 (1)
GATE CSE 2015 Set 1 (1)
GATE CSE 2015 Set 3 (2)
GATE CSE 2015 Set 2 (1)
GATE CSE 2014 Set 2 (1)
GATE CSE 2014 Set 1 (1)
GATE CSE 2009 (3)
GATE CSE 2007 (2)
GATE CSE 2006 (2)
GATE CSE 2005 (1)
GATE CSE 2003 (1)
GATE CSE Subjects
Theory of Computation
Operating Systems
Algorithms
Database Management System
Data Structures
Computer Networks
Software Engineering
Compiler Design
Web Technologies
General Aptitude
Discrete Mathematics
Programming Languages