1
GATE CSE 2015 Set 3
Numerical
+2
-0
Two hosts are connected via a packet switch with $${10^7}$$ bits per second links. Each link has a propagation delay of $$20$$ micro-seconds. The switch begins forwarding a packet $$35$$ microseconds after it receives the same. If $$10000$$ bits of data are to be transmitted between the two hosts using a packet size of $$5000$$ bits, the time elapsed between the transmission of the first bit of data and the reception of the last bit of the data in microseconds is____________.
2
GATE CSE 2015 Set 2
Numerical
+2
-0
Two hosts are connected via a packet switch with 107 bits per second links. Each link has a propagation delay of 20 microseconds. The switch begins forwarding a packet 35 microseconds after it receives the same. If 1000 bits of data are to be transmitted between the two hosts using a packet size of 5000 bits, the time elapsed between the transmission of the first bit of data and the reception of the last of the data in microsecond is _________.
3
GATE CSE 2015 Set 1
Numerical
+2
-0
Suppose that the stop-and-wait protocol is used on a link with a bit rate of 64 kilobits per second and 20 milliseconds propagation delay. Assume that the transmission time for the acknowledgment and the processing time at nodes are negligible. Then the minimum frame size in bytes to achieve a link utilization of at least 50% is _________.
4
GATE CSE 2014 Set 2
MCQ (Single Correct Answer)
+2
-0.6
Consider the store and forward packet switched network given below. Assume that the bandwidth of each link is 106 bytes/sec. A user on host A sends a file of size 103 bytes to host B through routers R1 and R2 in three different ways. In the first case a single packet containing the complete file is transmitted from A to B. In the second case, the file is split into 10 equal parts, and these packets are transmitted from A to B. In the third case, the file is split into 20 equal parts and these packets are sent from A to B. Each packet contains 100 bytes of header information along with the user data. Consider only transmission time and ignore processing, queuing and propagation delays. Also assume that there are no errors during transmission. Let T1, T2 and T3 be the times taken to transmit the file in the first, second and third case respectively. Which one of the following is CORRECT?
A
$$T1 < T2 < T3$$
B
$$T1 > T2 > T3$$
C
$$T1 = T3,T3 < T1$$
D
$$T1 = T3,T3 > T2$$
GATE CSE Subjects
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
CBSE
Class 12