A coil of 300 turns is wound on a non-magnetic core having a mean circumference of 300 mm and a cross-sectional area of 300 mm². The inductance the coil corresponding to a magnetizing current of 3 A will be ( Given that $$\mu_0=4\mathrm\pi\times10^{-7}\;\mathrm H/\mathrm m$$)

An inductor designed with $$400$$ turns coil wound on an iron core of $$16\,\,c{m^2}$$ cross sectional area and with a cut of an air gap length of $$1$$ $$mm$$. The coil is connected to a $$230$$ $$V,$$ $$50$$ $$Hz$$ ac supply. Neglect coil resistance, core loss, iron reluctance and leakage inductance. $$\left( {{\mu _0} = 4\pi \times {{10}^{ - 7}}\,H/m} \right)$$

The current in the inductor is

An inductor designed with $$400$$ turns coil wound on an iron core of $$16\,\,c{m^2}$$ cross sectional area and with a cut of an air gap length of $$1$$ $$mm$$. The coil is connected to a $$230$$ $$V,$$ $$50$$ $$Hz$$ ac supply. Neglect coil resistance, core loss, iron reluctance and leakage inductance. $$\left( {{\mu _0} = 4\pi \times {{10}^{ - 7}}\,H/m} \right)$$

The average force on the core to reduce the air gap will be

The conductors of a $$10$$ $$km$$ long, single phase, two wire line are separated by a distance of $$1.5$$ $$m.$$ The diameter of each conductor is $$1$$ $$cm.$$ If the conductors are of copper, the inductance of the circuit is